Fuel corrosion inhibitors are additives designed to protect fuel systems from rust and corrosion. They form a protective layer on metal surfaces, preventing degradation caused by moisture and acidic compounds. These inhibitors enhance the longevity and efficiency of fuel storage and delivery systems.

Key specifications and technical properties of Fuel Corrosion Inhibitors and Fuel Systems:

- Size: Typically available in 1-liter to 210-liter drums or bulk quantities.

- Grade: ASTM D665, MIL-PRF-25017, or proprietary formulations.

- Viscosity: 5-50 cSt at 40°C, depending on formulation.

- Buoyancy: Not applicable (liquid form, non-buoyant).

- Material: Synthetic or organic compounds (amines, imidazolines, esters).

- Flash Point: >60°C (varies by product).

- Density: 0.8-1.1 g/cm³.

- Compatibility: Suitable for gasoline, diesel, jet fuel, and biofuels.

- Operating Temperature: -40°C to 150°C.

- Concentration: 50-500 ppm (typical treatment rate).

- pH: 6-10 (neutral to mildly alkaline).

- Solubility: Fully soluble in hydrocarbon fuels.

- Shelf Life: 2-5 years in sealed containers.